CombiSave Valve - Saves Water, Saves Gas, Reduces CO2,

Can be retro-fitted to any wall hung combination boiler No power supply or maintenance required Saves gas, water and reduces CO2

          Price inclusive of Shipping £69.99 

The CombiSave is designed to fit on the domestic hot water outlet of a combination boiler to reduce the amount of water wasted while waiting for the boiler to heat the water. It will also greatly reduce the time to heat the water thus saving on gas as well.

The CombiSave is installed on the domestic hot water outlet of the combination boiler. When the hot tap is turned on the CombiSave will reduce the flow of water until it has reached the set temperature. At which point, the valve will open fully and allow the hot water to flow freely to the tap. Saving an average of up to 8 litres, each time the tap is turned on from cold.

Pressure range                                   0.2~10bar

Maximun inlet water temp                  85 degC

Temperature calibration range          40~50 degC

Maximum outlet flow (@ 6bar)           25l/min

By-pass flow adjustment (@ 6bar)    0.5~4l/min

Pipe size (inlet and outlet)                  15mm

Boiler type                                            Combi Condensing