Armaflex insulation 10mm (13mm wall) - priced per metre

High temperature insulation for solar use10mm internal diameter, 13mm wall thickness; suitable for up to 175c constant temperature or up to 230c for short periods.

HT/Armaflex is the insulation that meets the growing demand for a reliable and environmentally friendly flexible insulation material that can be used at higher temperature.

-          Remains flexible at high temperatures of up to + 150degC** and low temperatures down to – 200degC.

-          UV-resistant and can be installed outside without additional protective measures.

-          Class 1 resistance to flame spread in accordance with BS 476 Part 7 test procedure.

-          Built-in vapour barrier prevents condensation.

-          Improved resistance against oil.

-          Reduced smoke development in the event of fire.

-          Lightweight and flexible: quick and easy installation with low maintenance requirements resulting in time and cost savings.

-          Dust, fibre and CFC free with an ODP zero.

- Thermal Conductivity at +40 deg C – 0.045 W/(m . K)

- Water vapour Permeability – Moisture resistance Factor µ > 2,500

- Water Absorption – 0.2% by volume

- Surface Spread of Flames – Class 1

- Reaction to fire – Self-extinguishing, does not drip

- Noise Reduction – Sound Absorption Coefficient ISO 354:2003 up to 0.8

- Resistance to – Building Materials – Very Good - Ozone – Very Good - UV – Very Good

- Environmental Aspects – ODP zero, GWP zero

- Health Aspects – Dust & Fibre Free

- Thermal Conductivity at 0 deg C – 0.040 W/(m . K)